Refrion Spray System
Inlet air humidification system through water atomisation. A very thin water mist generated by specific nozzles fills and humidifies the inlet air, thus making it colder, depending on the different working conditions.
Water atomisation system available for the liquid coolers and the air cooled condensers.
Special diffusing nozzles spread a very thin water mist throughout the inlet air and the finned surface of the heat exchanger. The cooling capacity of the unit is considerably enhanced by the combinated effect of the adiabatic saturation of the air and the evaporation of the drops onto the fins.
Advantages
- The unit can be sized according to an air inlet design temperature that is much lower than the ambient temperature (TCALC << TAMB) (see example).
- A smaller sized unit, with a smaller heat exchanger surface can be selected.
- The unit can be used to cool the liquid to a temperature lower than the ambient temperature.
- The Industrial Adiabatic System combined with “EC” electronic switching fans, an “Intelliboard” PLC or with a Speed controller, lowers energy consumption, Sound Emission Levels and optimizes water use.
- No risk of legionella contamination.
