219.325.0414

The Highest Quality of Industrial Refrigeration

 Equipment in the Market

Midstates Refrigeration

Supply, Inc.

EVAPORATORS

DT/DTX Series Unit Cooler

 

Ceiling mounted draw through unit cooler for small to medium sized coolers, freezers and dock cooling requirements

 

  • Unit designs are available in 1 to 6 fans
  • Single and three phase motors available
  • All motors wired to a factory mounted non-fused disconnect switch
  • Motors totally enclosed with an automatically resetting thermal overload switch
  • Type of fan: Axial
  • Tonnage Range: 1.5 – 17 tons (5.4kw-60kw)
  • Motor HP: 1/3 and ½ hp
  • Optional blow through configuration available
  • Six and eight row unit designs are available in one to six fans.
dtx evaporator midstates refrigeration supply

LPC Series

 

  • Designed for applications where ceiling height is limited
  •  Cast aluminum fans for peak performance in all applications
  •  Available with 2,4, 5 and 6 fans
  • Tubes are ¾” O.D. staggered in the direction of air flow. Turbo spacers are located between tubes to provide nominal 3 or 4 fin per inch spacing and improve fin efficiency by turbulating the air flow
  • Type of fan:  Axial
  • Tonnage Range:  4-27 tons
  • Motor HP Range: 0.5-2.0hp
  • Two Fan Speeds: 870, 1160 RPM
  • Motors include an automatically resetting thermal overload switch
  •  All motors wired to a single terminal block
lpc evaporator midstates refrigeration supply

DT/DTX

LPC

PC

BTR

STC

CF

FL

PR

PC Series

 

  • Large product freezer/cooler, penthouse and carcass chilling
  • Optimized coil geometry, special fin design and a modular fan motor system
  • Available in 111 models with various fan discharge arrangements
  • 1-4 fans discharge available with horizontal, penthouse and 45° down housing
  • Tubes are ¾” OD staggered in the direction of air flow. Turbo spacers are located between tubes to provide nominal 3 or 4 fin per inch spacing and improve fin efficiency by turbulating the air flow.  Tubes also available in 1” OD
  • Three fan speeds: 870, 1160, 1750 RPM
  • Motors wired in individual terminal blocks
  • Type of fan: Cast aluminum propeller for longer air throws and external static pressure up to ½ w.g.
  • Tonnage Range: 5 – 70 tons (17.6kw to 246kw)
  • Motor hp Range: 1.0 – 7.5hp
pc evaporative midstates refrigeration supply

TOP

BTR Between-the-Rail Unit Coolers

 

  • Preferred coil for process areas where low air velocity and worker comfort are priority
  • Available in 24 models which can be engineered for ammonia, halocarbon, brine, propylene glycol, ethylene glycol or calcium chloride applications
  • Standard stainless steel sheet metal construction
  • Single and three phase motors
  • Two fan diameters
  • Motors totally enclosed with an automatically resetting thermal overload switch
  • Motors wired together
  • Type of Fan:  Plastic propeller type
  • Tonnage Range:  2 – 14 tons (7kw-49kw)
  • Motor HP:  1/6 and 1/2 hp
btr evaporator midstates refrigeration supply

STC Series Low Profile

 

  • Type of fan: Axial
  • Tonnage Range:  1.0 – 40 tons
  • Motor HP Range:  1/3  – 2hp
  • Two fan speeds: 850, 1140 RPM
  • Three fan diameters: 24”, 30”, 36”
  • All motors wired into single terminal block
  • Motors include an automatically resetting thermal overload switch
stc evaporator midstates refrigration supply

TOP

cf evaporator midstates refrigeration supply

CF II Series

 

  • Unit can be ceiling hung or platform mounted
  • Utilized for ductwork, wine cellars and barrel rooms
  • Efficient, forward curved centrifugal blower coolers and freezers engineered for high external static pressure and noise sensitive applications
  • Available in 30 models with varying motor/blower combinations
  •  Fan discharge can be horizontal, vertical up, vertical down
  • Type of Fan: Centrifugal
  • Tonnage Range: 2.5 – 47 ton (8.8kw – 165.4kw)
  •  Motor hp Range: 1 – 50 hp
fl evaporator midstates refrigeration supply

FL Series

 

  • Floor mounted for coolers and freezers
  • Efficient forward curved centrifugal blower coolers and freezers engineered for high external static pressure and noise sensitive applications
  • Available in 30 models in front or top discharge arrangement
  •  Can be located within the cooler or outside the room ducted from the discharge
  • Type of fan:  Centrifugal
  • Tonnage Range:  2.5 – 47 ton (8.8-165.4KW)
  •  Motor HP Range: 1 – 50 hp
  •  Quiet operation
  •  Water defrost capable

TOP

pr evaporator midstates refrigeration supply

PR Series

 

  • Specialized unit cooler for produce ripening rooms.
  •  Air by-pass side ports allow high DFM circulation rates while limiting the coil face velocity to 600 FPM preventing moisture carryover.
  • Blower and coil assemblies may be separated allowing the blower section to be lowered for replacement of shafts or bearings while the coil and piping remain in place.
  • Close spaced 3/4 O.D. tubes are staggered in direction of air flow.
  • Copper tubes are expanded into aluminum fin collars for positive contact. Copper tube/aluminum fin coils are applicable for glycol brines, water and direct expansion (DXF) or recirculated (RTF) halocarbons.

MENU

 

Midstates Refrigeration Supply Inc. © 2016 Privacy policy

 

 Mandolin Marketing

CONTACT

 

219.325.0414

219.324.5424 Fax

 

 

ADDRESS

 

Mid-States Refrigeration Supply Inc.

7001 N. State Road 39

LaPorte, Indiana 46350